Cannabis Infused Gummies Recipe

AuthorInfusedEats
RatingDifficultyBeginner

This very popular Cannabis Gummies recipe from RuffHouse Studios using marijuana Infused Coconut Oil will do the trick!

ShareTweetSave

Yields12 Servings
Prep Time2 hrsCook Time20 minsTotal Time2 hrs 20 mins

  oz Cannabis flowers (10 - 12 grams ABV/ Rosin Chips)
 ½ tsp Sunflower/ Soy Lecithin
 ¼ cup Coconut Oil
 ½ cup Water
 1 oz Unflavored Gelatin
 1 pack 6 oz Jello (any flavor)

Decarb Cannabis:
1

Grind, manicure and decarboxylate cannabis in an oven safe dish in an oven preheated to 250° F for 25 minutes.

Infuse Oil
2

Combine the decarbed cannabis, crumbles rosin chips (if using), Sunflower (Or soy) lecithin and coconut oil in oven safe container and mix. Cover, put in a water bath and place in oven still set at 250° F for 2 hours. (Remove and stir halfway through.)

3

Remove the oil from oven and let cool for a couple minutes then strain the oil through a fine mesh strainer or filter. Press the oil out of the cannabis. Measure out ¼ cup for the recipe.

Make Gummies
4

In a small saucepan over medium heat combine the water and the infused oil and whisk together as you bring it to a boil.

5

Whisk in each container of the unflavored gelatin one at a time while continuing to whisk.

6

Whisk in the flavored gelatin and keep stirring for about 5 minutes and bring to a rolling boil.

Mold Gummies
7

Reduce heat to low, spray molds with cooking spray. Fill each mold to the top with a dropper or spoon. Keep stirring your mix periodically.

8

Place molds in freezer for 20 minutes or fridge for an hour to firm up.

9

Unmold the candies to enjoy right away or store in airtight containers for 2 – 3 days at room temperature. Freeze for extended storage.

Ingredients

  oz Cannabis flowers (10 - 12 grams ABV/ Rosin Chips)
 ½ tsp Sunflower/ Soy Lecithin
 ¼ cup Coconut Oil
 ½ cup Water
 1 oz Unflavored Gelatin
 1 pack 6 oz Jello (any flavor)

Directions

Decarb Cannabis:
1

Grind, manicure and decarboxylate cannabis in an oven safe dish in an oven preheated to 250° F for 25 minutes.

Infuse Oil
2

Combine the decarbed cannabis, crumbles rosin chips (if using), Sunflower (Or soy) lecithin and coconut oil in oven safe container and mix. Cover, put in a water bath and place in oven still set at 250° F for 2 hours. (Remove and stir halfway through.)

3

Remove the oil from oven and let cool for a couple minutes then strain the oil through a fine mesh strainer or filter. Press the oil out of the cannabis. Measure out ¼ cup for the recipe.

Make Gummies
4

In a small saucepan over medium heat combine the water and the infused oil and whisk together as you bring it to a boil.

5

Whisk in each container of the unflavored gelatin one at a time while continuing to whisk.

6

Whisk in the flavored gelatin and keep stirring for about 5 minutes and bring to a rolling boil.

Mold Gummies
7

Reduce heat to low, spray molds with cooking spray. Fill each mold to the top with a dropper or spoon. Keep stirring your mix periodically.

8

Place molds in freezer for 20 minutes or fridge for an hour to firm up.

9

Unmold the candies to enjoy right away or store in airtight containers for 2 – 3 days at room temperature. Freeze for extended storage.

Cannabis Infused Gummies Recipe
Summary
How to Make Cannabis Gummies (With Infused Coconut Oil) Cannabasics #86
Title
How to Make Cannabis Gummies (With Infused Coconut Oil) Cannabasics #86
Description

Learn How To Make Weed Gummies easily using Cannabis Infused Coconut Oil using any flavor of Jello you like

107 Comments

    1. No, you should be fine just keep it barely boiling for a few minutes, not too long, not too hot.

      THC depends on the potency:
      – 3.5G X 10%THC = 350MG
      – 3.5G X 20%THC = 700MG
      – 3.5G X 30%THC = 1050MG

      1. Its actually about half of what you said. Only about 50-60 percent of thc is activated fully and ready to be consumed orally, so 3.5 @ 10% would actually be closer to 175 mg

          1. Wrong again
            I cannot quote figures on Decarb itself but:
            Coconunt Oil, Cannabutter etc methods extract about 50-60% of THC content
            RSO Oil, Alcohol, Butane methods extract approx. 80-90%

        1. wrong, lab test show infusing oil with decarbed flower retains almost 98% of the thc. Check Ardent website for lab results.

          1. Thanks because I am using this recipe, I have maybe a cup or more of Canna Coconut oil! I thought infused Canna butter & oil THC is high, all my friends say mine are very potent & I don’t use Lecithin, only because it seems unnecessary! Edibles anyway I caution people to cut in quarters & wait for 45 min & go from there & please don’t drive🌿✌️🌿👩🏻‍🍳I am an Avid baker👩🏻‍🍳🙌🌿✌️

          2. Thanks because I am using this recipe, I have maybe a cup or more of Canna Coconut oil! I thought infused Canna butter & oil THC is high, all my friends say mine are very potent & I don’t use Lecithin, only because it seems unnecessary! Edibles anyway I caution people to cut in quarters & wait for 45 min & go from there & please don’t drive🌿✌️🌿👩🏻‍🍳I am an Avid baker!

    2. The potency is the potency and gram weight as described.. however, on the RUFFHOUSE STUDIOS video you see 100 bears made and the recipe says “makes 12 servings”….??well if 12 they’d be around 600mg ea, (depending on potency) and at 100 they’d be about 5mg each. How many gummies would be a proper amount of not too much nor to weak? Made it twice, first time I forgot to grind the decanted buds…(rookie!) & 2nd time got everything right, but still had a lot of made Gummies and left over gummi material so I wasn’t sure what the msg were?! Any suggestions for duze and mg from this recipe if I want 25mg or 50mg, assuming a 22-25% THCa flower@ grams called gir in recipe, 3.5.

  1. Where is the original recipe? This isnt it, it’s missing ingredients so its inaccurate. For some reason the full recipe disappeared off ruffhouse site this week and the link on your tube goes to this page. What happened?

    1. Sorry for the error, I updated the ingredients list and the directions. This site is for recipes specifically so I am putting all the recipes here to be better found and displayed in Google searches. Made some mistakes when inputting the data from other site.

          1. I personally do not use BHO or any other harsh solvent extracted concentrates in edibles. I’d use rosin press, (ice water) bubble hash, ethyl alcohol tincture or some other method to make concentrates for edibles that do not involve dangerous chemicals. This is because when you pass anything through your digestive system you are exposing your body longer and more thoroughly to everything, including toxins, in the edibles. So those type of concentrates may be “safe” to smoke, I don’t want to risk pancreatic cancer. Others may disagree but that is my take. You can, but I wouldn’t.

        1. Hell, I use 28g of high quality flower every time (indica if i can get my hands on and confirm it), with 3/4 cup of coconut oil, after infusion im left with 1/2 cup of infused oil.

          1. Wow, that’s some strong oil. I’ve been using 1 oz and 2 cups of oil. I’ve been using the boxed Duncan Hines brownie mix that calls for 1/2 cup oil. I have 1 brownie before bed and sleep all night.

          2. Could I use 1/2 cup of oil to get the 1/4th of oil I need for the recipe with using 28 grams?

    1. It’s hard to answer that without knowing the THC content of the bud and size of the gummies but here is a general idea.
      7G X 20% THC = 1,400 MG available.
      Now let’s say you have 50 gummies.
      1,400MG THC / 50 Gummies = 28MG THC/ per gummie (theoretically)
      This is assuming you extract 100% of the THC in the extraction which is unlikely. You probably get 75% of the THC with this type of coconut oil extraction at best. It ALL depends of course on the potency of the oil but the only way to know for sure is to test the oil, each and every batch. Hope this is helpful.

        1. That’s handy but it assumes 100% transfer from bud to oil?
          I am guessing most of us would be lucky to hit the ~90% that anova lab tests show.
          🙂

  2. So can I substitute the coconut oil for vodka? I’ve seen other videos making cannabis infused vodka, just wondering if the gummies for turn out right?

    1. Alcohol based tinctures require 90+ proof alcohol such as Alcool, Isopropenol, etc. example RSO Oil (vodka is only 40 proof)
      Alcohol tinctures also require a very different cooking/boiling down process, compared to Coconut oil or Butter processes.
      You can find many RSO recipies and procedures with a simply Google search. just don’t blow yourself up.

      1. if i put 28 grams of flower into 14floz of coconut oil. how much mg theoretically is in each tablespoon? also how much mg per gummie using this recipe when i used this coconut oil?

        1. It depends many factors including the percentage of THC in your bud and how you decarboxalated it. Did you use lecithin when you infused the oil? Lecithin helps bind the THC molecules to the fat in the coconut oil.

          I use the magical butter machine to make my infusion. For that I used 2 cups of coconut oil and one ounce of high percentage THC – roughly 25%. Total milligrams of THC equals 7125 mg or approximately 223 mg per tablespoon. That should give you approximately 20 mg gummie bears (I make 200 1 ml bears and always have extra I put on parchment paper, then cut into tiny squares. Otherwise it’d be higher.

  3. Hey guys,
    Was wondering if it is possible to use 3,5gs of bud & not use the Sunflower/Soy Lecithin? E.g could I halve the ingredients and still get some good quality bears?
    Cheers

    1. You would still get some decent but not as good or high quality as the sunflower/soy lecithin acts as a emusifier making the bud adhere better to the fats of the coconut oil

    2. As well as, or even more importantly, aside from the Lecithin aiding in mixing (emulsification) in the other ingredients, Lecithin aides greatly in how your gut absorbs THC. Some studies report 50% more absorption and quicker uptake of THC into your bloodstream.

      1. I’ve read that MCT oil provides improved absorption, thus eliminating the need for lecithin. I use it exclusively to make my infusions for sublingual dosing. But I wonder if it would work for making gummies.

    1. It said they stay good for only a few days in an airtight container at room temperature. For extended storage to put them in the freeze.

    2. Because you ate them all?

      I made my first batch tonight. They came out perfect. Since I have 200 plus, I plan on freezing them in an airtight container. I bcertainly hope they’ll keep for weeks. What was your problem?

  4. In the video you yielded three 50 count trays, plus extra. You also said that 3 or 4 of these is a serving. Based on the recipe for one box of Jello and 1oz of gelatin you said that it’s for 12 servings, which would be 12×4=48 gummy’s. So how did you come out with three times that amount?

    1. Based on the recipe, I filled four trays of one ml bears with fifty bears per tray. Plus I had leftover that I placed on parchment paper. I’d say in the future it will make about six or seven trays of fifty.

      Note gummy bear molds contain various sizes. I use 1 ml molds, but they make 2 ml, 5 ml etc trays too.

  5. Used the tincture extraction method for 1/4 solid shake used 10 mg tincture added cocunut oil to it to equal a 1/4 cup and used one extra packet of gelatin extra to get some added firmness firmness to the gummies while in your pocket.they are in fridge now but just the little bit of excess left of I munched wow this recipe is amazing

  6. This recipe was easy, straightforward, and delicious! On my second batch, I put the mixture into a squeeze bottle to distribute over the molds. This ended up being a lot faster and made way less mess than the dropper method.

    1. Yes squeeze bottle works but as I have experienced my first time you must be quick or it will solidify in the nozzle and then the nozzle burst off if you squeeze to hard, creating a delicious mess to eat lol. If you want take your time dont pour it all in the bottle at once, do it in batches while the remainder boils

      1. Go to a craft store,Look for Wilton’s candy making products,They have squeeze bottles that are silicone and meant for hot stuff,like to melt chocolate,etc… Thats what we use to fill the molds for our gummy bears,works great,no mess& you dont burn yourself while holding the bottle

        1. When I make chocolate I put a 4 cup glass measuring cup in pot of water as double boiler. Good for measurement and easy to pour molds with measuring cup.

    1. Heat carefully and slowly, never to a Boil. Boiling causes the sugars to solidify and clump, and also causes air bubbles, making the resulting gummies unclear and/or lumpy. It is also advantageous to remove the scum from the top of your mixture (let it cool a bit, then re-heat it) for clearer end product.

  7. 1/8oz converts to 3.544grams, but I see someone asked about using 7g (if just using flower and not rosin chips as well). Would you recommend using 7g or should it be sufficient with just the 3.544g as the recipe states? Also if just using flower should we still use the 1/2c of coconut oil as you stated in the video (because of evaporation) or should we just stick with the 1/4c?

  8. Very appreciated information sir.

    I’ve ordered the Mighty Fast herbal Infuser, for science.

    Are the 1/4 cup of tincture are the same (2 hours coconut oil vs 2-5 days alcohol tincture)? I’m lost. Would you make a tutorial to explain the differences between tinctures (oil and alcohol) and what are the benefits/advantages.

    Cheers, thanks a lot -Max

  9. I have made this recipe but it is sticky before I even can get it into the molds? What can I do to fix it? Also can I substitute canna butter for the oil?

    1. No Butter will separate and create greasy gummies. You can use a mixture of corn starch, icing sugar, (for sourness) citric acid as a coating to sprinkle or roll them in to get rid of oiliness and stickiness.

    1. next to zero. Smelly processes are (strongest) decarboxolating (mild) curing Butter or Coconut oil in crock pot.
      Making gummies not so much

  10. Love this! Definitely going to give it a try! With regards to the lecithin; I can’t find the liquid, only granules. Will this work? If yes, how much should I add?

    1. If you use powdered lecithin you only need 2/3rds the amount of liquid lecithin. For example if the recipe calls for 3 teaspoons of liquid lecithin you could use 2 teaspoons of powder instead.

      Lecithin increases bioavailability of the cannabinoids and helps bind water and fat together. In this recipe it’s binding the coconut oil to the water.

    1. As long as you use lecithin to bind the coconut oil you can prepare gelatin any way your confident in doing so.

  11. I bought CBD oil from Amazon would this work in this recipe? Replacing some steps and adding 1/4 cup of this to the recipe, good?

    1. As long as it’s coconut oil based. Liquid coconut will bind with the lecithin as well as solid coconut oil.

    1. Cannabutter will impart a buttery flavor. Coconut oil is used because it doesn’t really have its own flavor. In my experience as long as you have the lecithin to bind the fat and water together it works. Your mileage may vary.

      1. I find that unrefined coconut oil has an intense flavor I have trouble masking. I am going to try refined coconut oil to see if there it imparts less coconut flavor.
        Can you use sugar free jello?

        1. Do Not use Virgin Coconut Oil. If you use sugarless Jello U will need to add some other sweetener. Honey, corn syrup, etc

  12. Hey, could you give an equivalent from infused oil or butter to the candies weight. Like « with 0.05kg of butter you’ll have 0.2kg of strong candies »
    Thank you
    We’re cooking it from France !

  13. I ran into a couple issues on my first attempt with these, hoping someone can help me out for next time around…

    1) The coconut oil didn’t reduce from 1/2 cup to 1/4 cup so I had to leave 1/2 of it sit for another time. This means I lost 50% potency and has me wondering what went wrong. My stove’s temperature could be incorrect, but it’s a pretty new appliance and other than that I followed the directions. I also make firecrackers all the time and have had no issues de-carbing at 250° with the same oven thus far.

    2) The recipe calls for “1 pack 6 oz Jello (any flavor)”. Jello packs are only 3 oz though. So I used (2) to get to 6oz, but I feel like that was wayyyyyyy too much. I struggled filling two bear trays before the mixture got so thick it wouldn’t draw up into the baster any more. So I had to just pour it out on a flat surface. Add to that they are tough to eat, extremely chewy. Seems like other people are having a similar issue–makes me wonder if the recipe has a type and it should only be 1 pack 3 oz Jello.

    1. 1. I often end up with over a 1/4 cup of oil and have used up to 1/2 cup of oil in this recipe without issue. I usually make a double batch of oil and freeze the extra. With adding more oil I usually add an extra TBS of gelatin so they firm up nicely.

      2. I like to keep my sauce pan rolling at 170F while i’m molding the gummies. This keeps it viscus and not as sticky.

    2. You’ll have to experiment with the Jello/Gelatin vs Oil amounts.
      To do so, you can always re-heat the mixture to add or adjust any ingredient you want. Or simply to keep it pour-able when adding to molds.

  14. How do you get the gummy‘s to come out clear? Like when you buy them at a professional store. Once I combined the oil with the weed it automatically becomes a darker color, and I don’t like that. Period if I’m making lime gummy‘s I want them to be green and not look dirty. Does anybody have any ideas how to get clearer beautiful gummy‘s?

  15. I love this pot gummy recipe . I made them for first time without messing up at all. Thanks 🙏 recipe

  16. The first time I made these, it worked great even though I messed up and used a 3oz box! Since then, I’ve made it 4 times and every time, the oil separates out. Any ideas? This time I tried boiling a lot less thinking that maybe I boiled out too much water. The first time is the only time I have done all steps back to back from fresh flower to complete gummies. Was that the difference? Since then, I’ve made the oil before and done the gummies part another day

  17. why won’t my canna oil mix in with the jello when I make my gummies? it just sits on top. so when I put in my modes the canna oil is lying on top of the modes. It’s not mixed in.

  18. Looking at all that’s written here, and looking at the boxes of jello I just pulled out of the cabinet, I see that there is mention of 3oz and 6oz boxes of jello being used in recipes but regular boxes of jello I have are 0.3oz and 0.6oz for the small and large boxes. Is this a typo that keeps being made or are there actually these giant boxes of jello?

  19. Could you tell me in measuring terms, how much water and how much coconut oil. A cup of each doesn’t really explain how much quantity needed of each.

  20. Hello, so I made these a few times, followed everything to a T, and they always turn out pretty good imo. With some discrepancies in potency probably due to my error in whatever way.

    The main problem i’m having is that after they come out of the freezer (my window at 9 F), they are set out for about 12 hrs to harden and dry as much as possible. The gummies look as if they’re sweating like crazy and even if you wipe the oily sweat off them, they keep sweating like a fat kid on a treadmill.

    I was hoping someone could shed some light as to what I’m doing wrong here. I look forward to hearing any responses. Thank you

  21. Made 90 gummies last night using the 36 servings recipe. I substituted 2 egg yolks for the lecithin and they turned out perfect. Taste and consistency is better than a store bought gummie IMO! Lecithin is expensive and more difficult to find but the egg yolks work perfect as a substitute. Thought this might be useful for those on a budget or with allergies!

Leave a Reply to Ken Cancel reply

Your email address will not be published. Required fields are marked *